Get A Quote

Alloy Wire Cloth - MAISHI

Alloy Wire Cloth

15/10/2025

Stainless Steel Mesh is crafted from stainless steel wire woven on looms to create intricate patterns. With an extensive selection of stainless steel materials and wire gauges, coupled with various weaving techniques, the versatility of Stainless Steel Mesh knows no bounds. It is widely utilized in applications such as sifting, filtration, printing, safeguarding, and much more. We offer a comprehensive range of standard Stainless Steel Mesh specifications and are also equipped to tailor our production to meet unique customer demands.

Raw material check
Meterial preparation
Finish dia.warping beam
Length check
Surface check
Mesh weaving
Material check
Packing
Packing into box

Full Inspection

Full inspection for all the orders we manufacture.

Clearly Tolerance

All the inspection tolerance is open to our clients.

Perfect Service

Perfect service from pre-sale to after-sale

More About Stainless Steel Mesh

Click on the tabs below to learn more about Stainless Steel Mesh!

In the plain weave pattern, each weft wire passes alternately over and under the warp wire and vice versa It is the most widely available pattern and typically incorporates wire of the same diameter in both directions Plain weaves are considered to be the most stable mesh form and used in many applications throughout manufacturing industry.

The twill pattern follows same principle as plain weave, but each passes
alternately under and over two warp wires and vice versa. As a consequence of the woven path, the strand is deformed less during weaving, which not only allows a larger diameter wire to be used, but also results in a stronger structure when compared to the plain weave counterpart.

Mesh per inch	Aperture width W	Wire diameter d	Wire diameter d	Opening area A	Weight G	Special Woven Wire Cloth
						Test Sieves
						DIN ISO 3310-1Nominal aperture width	ASTME	USA Market
						DIN ISO 3310-1Nominal aperture width	11-1	Grades
-	mm	mm	inch	(%)	kg/㎡	W μm	No.	Mesh
635	0.02	0.02	0.0008	25	0.13	20	635
500	0.025	0.025	0.001	25	0.16	25	500	500
450	0.032	0.025	0.001	32	0.14
500	0.034	0.016	0.0006	46	0.07
400	0.036	0.028	0.0011	32	0.16
400		0.03	0.0012	30	0.17	36
400	0.038	0.023	0.0009	39	0.11
400		0.025	0.001	36	0.13
350	0.04	0.032	0.0013	31	0.18	40
360	0.042	0.028	0.0011	36	0.14
325		0.036	0.0014	29	0.21			325
400	0.045	0.018	0.0007	51	0.07
400		0.02	0.0008	48	0.08
325		0.032	0.0013	34	0.017	45	325
325	0.05	0.028	0.0011	41	0.13
325		0.03	0.0012	39	0.14
300		0.036	0.0014	34	0.19	50
280	0.053	0.036	0.0014	35	0.18	53	270
270		0.04	0.0016	32	0.22			270
325	0.056	0.023	0.0009	50	0.09
325		0.025	0.001	48	0.1
300		0.03	0.0012	42	0.13
270		0.036	0.0014	37	0.18			270
280	0.06	0.03	0.0012	44	0.13
280		0.032	0.0013	43	0.14
325	0.062	0.016	0.0006	63	0.04
250	0.063	0.036	0.0014	40	0.17
250		0.04	0.0014	37	0.2			250
230		0.045	0.0018	34	0.24	63	230
290	0.067	0.02	0.0008	59	0.06
240		0.04	0.0016	39	0.19
250	0.071	0.03	0.0012	49	0.11
210		0.05	0.002	34	0.26	71
200		0.056	0.0022	31	0.31			200
230	0.075	0.036	0.0014	46	0.15
200		0.05	0.002	36	0.25	75	200
200		0.053	0.0021	34	0.28			200
200	0.08	0.05	0.002	38	0.24
190		0.056	0.0022	35	0.29	80
160		0.08	0.0032	25	0.51
230	0.085	0.028	0.0011	57	0.09
230		0.03	0.0012	55	0.1
200		0.04	0.0016	46	0.16
180		0.056	0.0022	36	0.28			180
220	0.09	0.025	0.001	61	0.07
200		0.04	0.0016	48	0.16
180		0.05	0.002	41	0.23
160		0.071	0.0028	31	0.4
180	0.095	0.045	0.0018	46	0.18
150		0.075	0.003	31	0.42
200	0.1	0.025	0.001	64	0.06
170		0.05	0.002	44	0.21
150		0.067	0.0026	36	0.34			150
150		0.071	0.0028	34	0.37	100
165	0.106	0.05	0.002	46	0.2
150		0.06	0.0024	41	0.28
145		0.071	0.0028	36	0.36	106		140
140	0.112	0.071	0.0028	37	0.35
130		0.08	0.0032	34	0.42	112
165	0.118	0.036	0.0014	59	0.11
120		0.095	0.0037	31	0.54			120
160	0.125	0.036	0.0014	60	0.1
120		0.09	0.0035	34	0.48	125	120
135	0.132	0.056	0.0022	49	0.21
140	0.14	0.045	0.0018	57	0.14
125		0.063	0.0025	48	0.25
120		0.067	0.0025	46	0.28
110		0.09	0.0035	37	0.45
105		0.1	0.004	34	0.53	140
100		0.112	0.0045	31	0.63			100
130	0.15	0.045	0.0018	59	0.13
120		0.063	0.0025	50	0.24
100		0.1	0.004	36	0.51	150	100
100		0.112	0.0045	33	0.61
110	0.06	0.071	0.0028	48	0.28
105		0.075	0.003	46	0.3
105		0.08	0.0032	44	0.34
100		0.1	0.004	38	0.49
94		0.112	0.0045	35	0.59	160
90		0.125	0.005	32	0.7
100	0.18	0.08	0.0032	48	0.31
94		0.09	0.0035	44	0.38
87		0.112	0.0045	38	0.55
85		0.125	0.005	35	0.65	180	80
80		0.14	0.0055	32	0.78			80
100	0.19	0.063	0.0025	56	0.2
90		0.09	0.0035	46	0.37
88	0.2	0.09	0.0035	48	0.35
84		0.1	0.004	44	0.42
80		0.125	0.005	38	0.61
75		0.14	0.0055	35	0.73	200
70		0.16	0.0063	31	0.9
64		0.2	0.008	25	1.27
100	0.212	0.04	0.0016	71	0.08
84		0.09	0.0035	49	0.34
70		0.14	0.0055	36	0.71	212	70
68		0.16	0.0063	32	0.87
100	0.224	0.028	0.0011	79	0.04
100		0.03	0.0012	78	0.05
84		0.08	0.0032	54	0.27
80		0.095	0.0037	49	0.36
78		0.1	0.004	48	0.39
72		0.125	0.005	41	0.57
66		0.16	0.0063	34	0.85	224
60		0.2	0.008	28	1.2
78	0.23	0.095	0.0037	50	0.35
85	0.236	0.063	0.0025	62	0.17
78		0.09	0.0035	52	0.32
76		0.095	0.0037	51	0.35
60		0.19	0.0075	31	1.08	60
74	0.25	0.095	0.0037	53	0.33
72		0.1	0.004	51	0.36
70		0.112	0.0045	48	0.44
70		0.125	0.005	44	0.53
65		0.14	0.0055	41	0.64
62		0.16	0.0063	37	0.79	250	60
56		0.2	0.008	31	1.13
72	0.258	0.095	0.0037	54	0.32
80	0.265	0.05	0.002	71	0.1
80		0.053	0.0021	69	0.11
70		0.095	0.0037	55	0.32
70		0.1	0.004	53	0.35
66		0.112	0.0045	49	0.42
62		0.14	0.0055	43	0.61
60		0.16	0.0063	39	0.76	60
82	0.28	0.03	0.0012	82	0.04
80		0.04	0.0016	77	0.06
70		0.08	0.0032	60	0.23
66		0.1	0.004	54	0.33
64		0.112	0.0045	51	0.41
62		0.125	0.005	48	0.49
58		0.16	0.0063	40	0.74
55		0.18	0.0071	37	0.89	280
50		0.224	0.009	31	1.26			50
70	0.29	0.075	0.003	63	0.2
63		0.112	0.0045	52	0.4
62	0.3	0.1	0.004	56	0.32
62		0.112	0.0045	53	0.39
51		0.2	0.008	36	1.02	300	50
64	0.315	0.08	0.0032	64	0.21
60		0.1	0.004	58	0.31
60		0.112	0.0045	54	0.37
56		0.14	0.0055	48	0.55
54		0.16	0.0063	44	0.68
52		0.18	0.0071	40	0.83
50		0.2	0.008	37	0.99	315		50
58	0.325	0.112	0.0045	55	0.36
58	0.325	0.1	0.004	59	0.29
55		0.125	0.005	53	0.43
54		0.14	0.0055	50	0.52
56	0.355	0.1	0.004	61	0.28
53		0.125	0.005	55	0.41
54		0.14	0.0055	50	0.52
56	0.355	0.1	0.004	61	0.28
53		0.125	0.005	55	0.41
54		0.14	0.0055	50	0.52
56	0.355	0.1	0.004	61	0.28
53		0.125	0.005	55	0.41
52		0.14	0.0055	51	0.5
50		0.16	0.0063	48	0.63
48		0.18	0.0071	44	0.77
44		0.224	0.009	38	1.1	355	45
54	0.375	0.1	0.004	62	0.27
51		0.125	0.005	56	0.4
50		0.14	0.0055	53	0.48
50	0.4	0.112	0.0045	61	0.31
48		0.125	0.005	58	0.38
48		0.14	0.0055	55	0.46
44		0.18	0.0071	48	0.71
42		0.2	0.008	44	0.85
40		0.224	0.009	41	1.02
40		0.25	0.01	38	1.22	400		40
37		0.28	0.011	35	1.46
48	0.425	0.112	0.0045	63	0.3
46		0.125	0.005	60	0.36
45		0.14	0.0055	57	0.44
40		0.2	0.008	46	0.81
40		0.224	0.009	43	0.98
38		0.25	0.01	40	1.18
36		0.28	0.011	36	1.41	425	40
35		0.3	0.012	34	1.58
46	0.45	0.112	0.0045	64	0.28
44		0.125	0.005	61	0.35
44		0.14	0.0055	58	0.42
40		0.18	0.0071	51	0.65
40		0.2	0.008	48	0.78
36		0.25	0.01	41	1.13
35		0.28	0.011	35	1.36
50	0.475	0.03	0.0012	88	0.02	450
43		0.125	0.005	63	0.33
42		0.14	0.0055	60	0.4
40		0.16	0.0063	56	0.51
42	0.5	0.112	0.0045	67	0.26
41		0.125	0.005	64	0.32
40		0.14	0.0055	61	0.39
38		0.16	0.0063	57	0.49
36		0.2	0.008	51	0.73			30
35		0.224	0.009	48	0.88
34		0.25	0.01	44	1.06
32		0.28	0.011	41	1.28
32		0.3	0.012	39	1.43
31		0.315	0.0125	38	1.55	500	435
28		0.4	0.016	31	2.26
39	0.53	0.125	0.005	65	0.3
36		0.16	0.0063	59	0.47
36		0.18	0.0071	56	0.58
34		0.224	0.009	49	0.85
37	0.56	0.125	0.005	67	0.29
36		0.14	0.0055	64	0.36
35		0.16	0.0063	60	0.45
32		0.224	0.009	51	0.81
31		0.25	0.01	48	0.98
30		0.28	0.011	44	1.19			30
29		0.315	0.0125	41	1.44
28		0.355	0.014	37	1.75	560
34	0.6	0.16	0.0063	62	0.43
32		0.2	0.008	56	0.64
31		0.224	0.009	53	0.77
30		0.25	0.01	50	0.93
25		0.4	0.016	36	2.03	600
32	0.63	0.16	0.0063	64	0.41
30		0.224	0.009	54	0.75
28		0.25	0.01	51	0.9
28		0.28	0.011	48	1.09
26		0.315	0.0125	44	1.33
25		0.4	0.016	37	1.97	630	30
30	0.67	0.16	0.0063	65	0.39
30		0.18	0.0071	62	0.48
20		0.6	0.024	28	3.6
28	0.71	0.19	0.0075	62	0.51
28		0.2	0.008	61	0.56
27		0.224	0.009	58	0.68
26		0.28	0.011	51	1.01
25		0.315	0.0125	48	1.23
24		0.355	0.014	44	1.5			24
23		0.4	0.016	41	1.83
22		0.45	0.018	37	2.22	710	25
20		0.53	0.021	33	2.88
27	0.75	0.2	0.008	62	0.53
25		0.25	0.01	56	0.79
24		0.315	0.0125	50	1.18
22		0.4	0.016	43	1.77
26	0.8	0.18	0.0071	67	0.42
26		0.19	0.0075	65	0.46
25		0.2	0.008	64	0.51
24		0.25	0.01	58	0.76			24
23		0.315	0.0125	51	1.13
21		0.4	0.016	44	1.69
20		0.45	0.018	41	2.06	800
20		0.5	0.02	38	2.44
18		0.63	0.025	31	3.52
24	0.85	0.19	0.0075	67	0.44
24		0.2	0.008	66	0.48
24		0.224	0.009	63	0.59
20		0.4	0.016	46	1.63			20
20		0.45	0.018	43	1.98
19		0.5	0.02	40	2.35	850	20
23	0.9	0.2	0.008	67	0.46
22		0.224	0.009	64	0.57
22		0.25	0.01	61	0.69
21		0.315	0.0125	55	1.04
20		0.355	0.014	51	1.28			20
20		0.4	0.016	48	1.56
18		0.5	0.02	41	2.27	900
22	0.95	0.19	0.0075	69	0.4
22		0.2	0.008	68	0.44
22		0.224	0.009	65	0.54
20		0.315	0.0125	56	1
21	1	0.224	0.009	67	0.52
20		0.25	0.01	64	0.64
20		0.28	0.011	61	0.78
19		0.315	0.0125	58	0.96
19		0.355	0.014	54	1.18
18		0.4	0.016	51	1.45
17		0.5	0.02	44	2.12
16		0.56	0.022	41	2.55	1	18
16		0.63	0.025	38	3.09
14		0.8	0.032	31	4.52
20	1.06	0.224	0.009	68	0.5
19		0.25	0.01	65	0.61
15		0.63	0.025	39	2.98
18	1.12	0.25	0.01	67	0.58
18		0.315	0.0125	61	0.88
16		0.45	0.018	51	1.64			16
16		0.5	0.02	48	1.96
15		0.56	0.022	44	2.37	1.12
15		0.63	0.025	41	2.88
18	1.18	0.224	0.009	71	0.45
16		0.4	0.016	56	1.29
15		0.5	0.02	49	1.89
14		0.63	0.025	43	2.78	1.18	16
17	1.25	0.25	0.01	69	0.53
17		0.28	0.011	67	0.65
16		0.315	0.0125	64	0.81
16		0.355	0.014	61	1
15		0.4	0.016	57	1.23
15		0.5	0.02	51	1.81
14		0.56	0.022	48	2.2
14		0.63	0.025	44	2.68	1.25
12		0.8	0.032	37	3.96
16	1.32	0.224	0.009	73	0.41
16		0.28	0.011	68	0.62
14		0.5	0.02	53	1.74			14
13		0.63	0.025	46	2.58
12		0.8	0.032	39	3.83
16	1.4	0.224	0.009	74	0.39
16		0.25	0.01	72	0.48
15		0.28	0.011	69	0.59
15		0.315	0.0125	67	0.73
14		0.45	0.018	57	1.39
13		0.56	0.022	51	2.03
13		0.63	0.025	47	2.48
12		0.71	0.028	44	3.03	1.4	14	12
11		0.9	0.035	37	4.47
12	1.5	0.56	0.022	53	1.93			12
32	0.63	0.16	0.0063	64	0.41
30		0.224	0.009	54	0.75
28		0.25	0.01	51	0.9
28		0.28	0.011	48	1.09
26		0.315	0.0125	44	1.33
25		0.4	0.016	37	1.97	630	30
30	0.67	0.16	0.0063	65	0.39
30		0.18	0.0071	62	0.48
20		0.6	0.024	28	3.6
28	0.71	0.19	0.0075	62	0.51
28		0.2	0.008	61	0.56
27		0.224	0.009	58	0.68
26		0.28	0.011	51	1.01
25		0.315	0.0125	48	1.23
24		0.355	0.014	44	1.5			24
23		0.4	0.016	41	1.83
22		0.45	0.018	37	2.22	710	25
20		0.355	0.014	51	1.28			20
12		0.63	0.025	50	2.37
11		0.71	0.028	46	2.9
14	1.6	0.224	0.009	77	0.35
14		0.28	0.011	72	0.53
13		0.315	0.0125	67	0.82
13		0.355	0.014	67	0.82
12		0.5	0.02	58	1.51
11		0.63	0.025	51	2.26
11		0.71	0.028	48	2.77
11		0.8	0.032	44	3.39	1.6
9 3/4		1	0.032	38	4.88
13	1.7	0.315	0.0125	71	0.63
12		0.45	0.018	63	1.2
11		0.63	0.025	53	2.16
10		0.8	0.032	43	3.25	1.7	12
9 3/4		0.9	0.035	43	3.96
12	1.8	0.315	0.0125	72	0.6
12		0.355	0.014	70	0.74
11		0.5	0.02	61	1.38
11		0.56	0.022	58	1.69
10		0.63	0.025	55	2.07			10
9 3/4		0.8	0.032	48	3.13	1.8
9 1/2		0.9	0.035	44	3.81
9		1	0.04	41	4.54
11	1.9	0.4	0.016	68	0.88
6		2.34	0.092	20	16.4
11	2	0.25	0.01	79	0.35
11		0.315	0.0125	75	0.54
11		0.4	0.016	69	0.85
10		0.5	0.02	64	1.27
10		0.56	0.022	61	1.56
9 2/3		0.63	0.025	58	1.92	2	10
8 3/4		0.9	0.035	48	3.55
8 1/2		1	0.04	44	4.23
7 3/4		1.25	0.05	38	6.11
7 1/2		1.4	0.055	35	7.32
10	2.12	0.45	0.018	68	1
9 3/4		0.5	0.02	65	1.21
9		0.71	0.028	56	2.26
10	2.24	0.355	0.014	75	0.62
10		0.4	0.016	72	0.77
9 1/2		0.45	0.018	69	0.96
9		0.56	0.022	64	1.42
9		0.63	0.025	61	1.76
8		0.9	0.035	51	3.28	2.24
8		1	0.04	48	3.92
8	2.6	0.8	0.032	56	2.57
7 3/4		0.9	0.035	52	3.16
7 1/2		1	0.04	49	3.78	2.36	8
8 3/4	2.5	0.4	0.016	74	0.7
8 1/2		0.5	0.02	69	1.06
8		0.63	0.025	64	1.61
8		0.71	0.028	61	1.99			8
7 1/4		1	0.04	51	3.63	2.5
6 3/4		1.25	0.05	44	5.29
19		0.25	0.01	65	0.61
15		0.63	0.025	39	2.98
18	1.12	0.25	0.01	67	0.58
18		0.315	0.0125	61	0.88
16		0.45	0.018	51	1.64			16
16		0.5	0.02	48	1.96
15		0.56	0.022	44	2.37	1.12
15		0.63	0.025	41	2.88
18	1.18	0.224	0.009	71	0.45
16		0.4	0.016	56	1.29
15		0.5	0.02	49	1.89
14		0.63	0.025	43	2.78	1.18	16
17	1.25	0.25	0.01	69	0.53
17		0.28	0.011	67	0.65
16		0.315	0.0125	64	0.81
16		0.355	0.014	61	1
15		0.4	0.016	57	1.23
15		0.5	0.02	51	1.81
8	2.65	0.5	0.02	70	1.01
8		0.56	0.022	68	1.24
8	2.8	0.4	0.016	77	0.64
7 3/4		0.5	0.02	72	0.96
7		0.8	0.032	60	2.26			7
6 1/2		1.12	0.045	51	4.06	2.8
6		1.4	0.055	44	5.93
7	3.15	0.45	0.018	77	0.71
7		0.5	0.02	74	0.87
6 3/4		0.56	0.022	72	1.07
6 3/4		0.63	0.025	69	1.33
6 1/2		0.8	0.032	64	2.06
6		1	0.04	58	3.06
6		1.12	0.045	54	3.73
5 3/4		1.25	0.05	4.51	3.15
5 1/2		1.4	0.055	48	5.47
5 1/4		1.6	0.063	44	6.84
6	3.35	0.9	0.035	62	2.42			6
5 1/2		1.25	0.05	53	4.31	3.35	6
6 1/4	3.55	0.5	0.02	77	0.78
6		0.63	0.025	72	1.21			4
6		0.71	0.028	69	1.5
5 3/4		0.9	0.035	64	2.31
5 1/2		1	0.04	61	2.79
5 1/4		1.25	0.05	55	4.13	3.55
5		1.4	0.055	51	5.03
5		1.6	0.063	48	6.31
4 1/2		2	0.08	41	9.15
5 1/2	4	0.5	0.02	79	0.71
5 1/2		0.63	0.025	75	1.09
5 3/8		0.71	0.028	72	1.36
		0.8	0.032	69	1.69
5		1	0.04	64	2.54
4 3/4		1.25	0.05	58	3.78
4 3/4		1.4	0.055	55	4.61	4	5
4 1/2		1.6	0.063	51	5.81
4 1/4		2	0.08	44	8.47
3 3/4		2.5	0.1	38	12.21
4 2/3	4.5	1	0.04	67	2.31
4 1/2		1.25	0.05	61	3.45
4 1/3		1.4	0.055	58	4.22	4.5
4 1/4		1.5	0.059	56	4.67
4		1.8	0.071	51	6.53
3 2/3		2.5	0.1	41	11.34
4 1/3	4.75	1.12	0.045	65	2.71
4		1.6	0.063	56	5.12	4.75	4	4
4 1/2	5	0.56	0.022	81	0.72
4 1/2		0.71	0.028	77	1.12
		0.9	0.035	72	1.74
5		1	0.04	69	2.12
4		1.25	0.05	64	3.18			4
4		1.4	0.055	61	3.89
		1.6	0.063	57	4.93	5
3 3/4		1.8	0.071	54	6.05
		2	0.08	51	7.26
3 3/4	5.6	1.25	0.05	67	2.9
3 1/2		1.6	0.063	60	4.52	5.6	3 1/2
		1.8	0.071	57	5.56
3 1/4		2.24	0.09	51	8.13
	6	1	0.04	73	1.81
		2	0.08	56	6.35
		2.5	0.1	50	9.34
	6.3	0.56	0.022	84	0.58
3 1/2		1	0.04	74	1.74
		1.25	0.05	70	2.63
3 1/4		1.4	0.055	67	3.23
		1.6	0.063	64	4.12
		1.8	0.071	60	5.08	6.3	1/4"
3		2	0.08	58	6.12
		2.5	0.1	51	9.02
	6.7	0.9	0.035	78	1.35
3		1.8	0.071	62	4.84	6.7	0.265"
3	7.1	1.4	0.055	70	2.93
		1.8	0.071	64	4.62	7.1
		2.24	0.09	58	6.82
		2.5	0.1	55	8.27
	8	0.8	0.032	83	0.92
		1	0.04	79	1.41
2 3/4		1.25	0.05	75	2.15
		1.4	0.055	72	2.65
		1.6	0.063	69	3.39
2 1/2		2	0.08	64	5.08	8	5/16"
		2.5	0.1	58	7.56
2 1/2	8.5	1.6	0.063	71	3.22
		3.55	0.14	50	13.28
	9	1.4	0.055	75	2.39	9
2 1/24		2.24	0.09	64	5.67
		2.5	0.1	61	6.9
2		3.55	0.14	51	12.75
	10	0.9	0.035	84	0.94
		1	0.04	83	1.15
		1.4	0.055	77	2.18
		1.6	0.063	74	2.8
		1.8	0.071	72	3.49
		2	0.08	69	4.23
2		2.5	0.1	64	6.35	10
2	11.2	1.6	0.063	77	2.54			2
		2.5	0.1	67	5.8	11.2	7/16"
		3.15	0.125	61	8.78
	12.5	1	0.04	86	0.94
		1.6	0.063	79	2.3
		2	0.08	74	3.5
		2.5	0.1	69	5.29	12.5	1/2"
		3.15	0.125	64	8.05
	13.2	2.8	0.11	68	6.22	13.2	0.530"
		3.15	0.125	65	7.71
	14	2.5	0.1	72	4.81
		2.8	0.11	69	5.93	14
		3.55	0.14	64	9.12
	15	2	0.08	78	2.99
		2.5	0.1	73	4.54
		3	0.12	69	6.35
		4	0.16	62	10.69
	16	1.25	0.05	86	0.92
		1.8	0.071	81	2.31
		3.15	0.125	70	6.58	16	5/8"

In the plain dutch weave, the diameter of the warp wire is larger than the weft, and the mesh is formed by weaving a limited number of warps with the maximum number of weft wires woven tightly together, producing a cloth with no readily visible apertures. This mesh is strong and stable, easy to clean with a good flow rate suitable for high pressure liquid/solid separation.

Mesh No.(warp/ inch & weft/inch)	Wire dia.(mm) (warp & weft)	Wire dia.(inch) (warp & weft)	Fineness of Filtering(micron)	Weight (kg/square meter)	Weight (lb/square yard)


8/85	0.355/0.320	0.0140/0.01260	318-340	2.43	0.497
10/70	0.600/0.350	0.0240/0.01400	300-325	3.04	0.622
12/64	0.580/0.400	0.0230/0.01650	295-305	3.64	0.744
14/88	0.500/0.330	0.0190/0.01200	195-205	3.15	0.644
20/150	0.248/0.177	0.0098/0.00700	155-165	1.48	0.303
24/110	0.355/0.250	0.0150/0.01000	145-155	2.70	0.552
24/120	0.330/0.230	0.0130/0.00900	115-125	2.24	0.458
30/150	0.230/0.180	0.0090/0.00700	95-105	1.60	0.327
40/200	0.180/0.140	0.0070/0.00550	75-85	1.30	0.266
50/250	0.140/0.114	0.0055/0.00450	55-65	1.00	0.204
60/300	0.140/0.090	0.0055/0.00350	36-40	0.77	0.157
70/400	0.120/0.065	0.0047/0.00256	36-40	0.67	0.138
80/300	0.125/0.090	0.0049/0.00350	38-42	0.98	0.200
80/400	0.125/0.071	0.0049/0.00280	38-42	0.81	0.166
Special specifications can be customized upon customers' requirements

Twill Dutch Weave is produced with the weft wires packed together in the same principle as Plain Dutch Weave, but with double the number of weft wires woven in an over two, under two pattern. The weft wires overlie each other creating a sinuous path of filtration. The cloth is very robust with a smooth surface and the finer weft wires and smaller pore sizes provide excellent flow characteristics.

Mesh No.(warp/ inch & weft/inch)	Wire dia.(mm) (warp & weft)	Wire dia.(inch) (warp & weft)	Fineness of Filtering(micron)	Weight (kg/square meter)	Weight (lb/square yard)


20×200	0.30000×0.26670	0.0135x0.0105	138	3.930	0.804
24×220	0.30000×0.25000	0.0135x0.0100	105-112	3.980	0.814
20× 50	0.24892x0.20000	0.0098x0.0079	98-105	2.810	0.575
30×360	0.25000×0.15000	0.0100x0.0060	80-84	2.490	0.509
40×560	0.18000×0.10000	0.0070x0.0040	47-52	1.720	0.352
50×500	0.14000×0.11000	0.0055x0.0043	37-45	1.760	0.360
80×700	0.10000×0.08000	0.0040x0.0030	24-26	1.320	0.270
120×160	0.10000×0.06300	0.0040x0.0025	28-32	0.460	0.094
120×400	0.10000×0.06300	0.0040x0.0025	37-43	0.700	0.143
165×800	0.07100×0.05080	0.0028x0.0020	14-16	0.720	0.148
165×1400	0.07100×0.04000	0.0028x0.0016	9-11	0.770	0.157
200×600	0.06100x0.04600	0.0024x0.0018	19-21	0.500	0.103
200×1400	0.07112x0.04064	0.0028x0.0016	5-6	0.830	0.170
325×2300	0.03500×0.02500	0.0014x0.0010	2-3	0.460	0.094
325×2300	0.03500×0.02500	0.0014x0.0010	2-3	0.460	0.094
Special specifications can be customized upon customers' requirements

This is produced in a reverse of the Dutch Weave wire arrangement, whereby finer warp wires are positioned tightly together and a thicker weft wire is woven in at set intervals.

The cloth is mechanically strong with a high throughput and it performs particularly well in high pressure vertical and horizontal filter leaf applications where backwashing and filter cake removal are important.

Mesh No.(warp/ inch & weft/inch)	Wire dia.(mm) (warp & weft)	Wire dia.(inch) (warp & weft)	Fineness of Filtering(micron)	Weight (kg/square meter)	Weight (lb/square yard)


48 × 10	0.500×0.500	0.0200x0.0200	330.00	3.63	0.742
63 × 18	0.400×0.600	0.0160x0.0240	220.00	4.14	0.847
72 × 15	0.500×0.500	0.0197x0.0197	210.00	5.44	1.112
100 × 16	0.350×0.450	0.0140x0.0180	190.00	3.87	0.791
107 × 20	0.229 x0.610	0.0090x0.0240	210.00	3.34	0.683
128 × 36	0.200 x0.400	0.0080x0.0157	74.00	2.45	0.501
130 × 30	0.200 x0.410	0.0080x0.0160	110.00	2.30	0.470
132 × 16	0.320×0.450	0.0142x0.0177	170.00	4.24	0.867
152 × 24	0.270 ×0.355	0.0106x0.0140	160.00	3.73	0.763
160 × 17	0.270×0.450	0.0106x0.0177	160.00	2.02	0.413
170 × 18	0.270×0.450	0.0106x0.0177	160.00	4.01	0.820
175 × 50	0.150×0.300	0.0059x0.0118	130.00	2.00	0.409
180 × 20	0.270×0.450	0.0106x0.0177	170.00	4.29	0.877
200 × 40	0.170×0.270	0.0067x0.0106	120.00	2.17	0.444
240 × 40	0.150×0.250	0.0060x0.0100	70.00	1.98	0.405
260 × 40	0.150 x0.250	0.0060x0.0098	55.00	2.19	0.448
325 × 39	0.150 x0.300	0.0059x0.0118	90.00	2.44	0.499
290 × 75	0.150×0.200	0.0059x0.0080	35.00	2.49	0.509
400 × 120	0.057×0.100	0.0022x0.0039	30.00	0.64	0.131
615 × 102	0.040×0.110	0.0016x0.0043	27.00	0.56	0.115
615 × 130	0.040×0.130	0.0016x0.0050	22.00	0.80	0.164
720 × 150	0.036×0.100	0.0014x0.0039	17.00	0.61	0.125
Special specifications can be customized upon customers' requirements

Specification	Mesh (inch)	Weaving Type	Wire Diameter (um)	Aperture (um)	Open Area (%)	Thickness (um)	Calendered Thickness (um)	Theoretical Ink Volume (cm³/m²)


SS40/160	40	Plain	160	475	56.0	300-320	Asorder	179.1
SS60/120	60	Plain	120	303	51.3	230-245	Asorder	123.2
SS60/230	60	Twill	230	193	20.8	450-465	Asorder	225.0
SS80/190	80	Plain	90	228	52.0	175-180	Asorder	103.0
SS80/170	80	Twill	170	147	21.5	330-345	Asorder	185.0
SS100/100	100	Plain	100	154	36.8	195-205	Asorder	77.2
SS100/120	100	Plain	120	134	27.8	230-245	Asorder	82.0
SS120/80	120	Plain	80	132	39.0	155-165	Asorder	65.8
SS150/60	150	Plain	60	109	41.7	115-124	Asorder	50.0
SS165/45	165	Plain	45	109	50.1	88-93	Asorder	45.1
SS200/40	200	Plain	40	87	46.9	82-84	Asorder	43.0
SS200/53	200	Twill	53	74	34.0	106-110	Asorder	48.0
SS230/35	230	Plain	35	75	46.7	72-76	50-67	37.0
SS250/30	250	Plain	30	72	49.7	64-68	40-58	30.0
SS270/35	270	Plain	35	59	39.4	76-80	58-70	30.0
SS300/30	300	Plain	30	55	41.7	66-68	40-59	28.0
SS300/40	300	Twill	40	45	28.0	86-88	70-82	43.0
SS325/28	325	Plain	28	50	41.2	63-64	40-56	26.4
SS325/23	325	Plain	23	55	49.8	49-53	37-41	25.4
SS325/35	325	Twill	35	43	30.0	72-76	50-67	30.0
SS350/25	350	Plain	25	48	43.0	52-54	41-50	18.7
SS350/40	350	Twill	40	33	20.4	82-86	70-82	43.0
SS400/23	400	Plain	23	41	40.7	50-54	35-48	19.0
SS400/21	400	Plain	21	43	48.0	45-49	30-32	21.0
SS400/18	400	Plain	18	46	51.3	36-40	28-30	20.0
SS400/29	400	Twill	29	35	29.5	58-62	40-59	27.0
SS500/21	500	Plain	21	30	35.0	43-48	28-30	17.0
SS500/25	500	Twill	25	26	25.7	52-56	41-50	18.0
SS635/18	635	Plain	18	22	30.0	36-40	23-29	15.0
Remark:Theabovedataaretheoreticdata,forreferenceonly.Therewillbeaslightdifferencebetweendifferentbatches.

ASTM A580/A580M-18

Standard Specification for Stainless Steel Wire¹

ISO 9044:1999

Industrial woven wire cloth — Technical requirements and testing

ASTM E2016 - 15

Standard Specification for Industrial Woven Wire Cloth¹

ASTM E2814 − 11

Standard Guide for Industrial Woven Wire Filter Cloth¹

Liquid-Solid Filtration

Liquid-solid filtration is fundamental to industrial processes. For example, vertical and horizontal pressure leaf filters are used in the processing of food, edible oils, pharmaceuticals and chemicals. Plain Dutch weave and Reverse Plain Dutch weave are ideally suited for this application. They are robust and provide the flow rates required in most processes. AISI316L is the best recommended material.

Polymer/Plastic Filtration

Maishi offers a wide range of different mesh types for Polymer/plastic filters. From synthetic fibres to blown film, from polymer recycling to profile extrusions. we provide bespoke solutions to suit specific products.

Food industrial

Filter screen for oil, juice, beer, tea, milk, soybean, cookies etc.

Disaeration filters

Adopted with stainless steel sintered filter mesh to achieve solid-liquid separation, high filtration accuracy and long service life.

Fluidised beds

Good mechanical strength, abrasion resistance and excellent chemical properties. AISI316L is the best recommended material for fluidised beds.

Mining

Woven from pre-crimped wires, 65-Mn steel is very abrasive and corrosive, crimped wire offers stable structure and good strength. Prevent slippery,anti vibration, good elasticity and toughness.

Dryers

Generally use 12-20 mesh stainless steel mesh for dryers, High temperature, acid and alkali corrosion, smooth surface and High mechanical strength.

Oil Filtration

Oil filter is mainly used for oil production filtration with perfect performance of anti-acid, anti-alkali, temperature resistance, wear resistance and other characteristics.

Nutsche filters

MAISHI offers a wide range of different mesh types for Nutsche filters. It has long service life, excellent separation, defined flow rate, easy to clean features.

Sintered Filter

Stainless steel sintered filter can be made with one,two,three or five layers,the shape is available from sheets,discs and other shapes.

Feature:1. Heat resistance, acid resistance and corrosion resistance and wear.

2. Accurate and stable filtering rate.

3. High mechanical strength.

4. Easy to clean.

5. Suitable for cutting, bending, stamping, drawing, welding and other processing conditions.

Materials:

Type 316

The stainless steel printing mesh is made in Type 316 which is stabilized with the 2% molybdenum. It has perfect resisting quality to survive against corrosion as compared to the chromium and nickel made stainless steel. This material has a unique property of T-316 which is quite durable in use. There exists some mechanical properties in this type which has a fabricating uniqueness and it is similar to T-304.

The T-316 wire mesh cloth woven has been used in chemical processing at the moment when the processing requires a better resisting capability against corrosion than normal chromium nickel types.

Type 316 L

The steel printing mesh is also formed in Type 316 L which is very common as T-316. The main difference in between them is that the reduced carbon material is produced in form of wire cloth weave. These products steel wire mesh and steel wire cloth are frequently used in petroleum industry. It is also providing favorable support in chemical industry and is providing various advantages in keeping environment safe. It is also providing its best assistance in mining, metallurgy, aeronautical space, paper manufacturing, electronics and many more.

Uses: stainless steel screen printing mesh is apply to be used for platemaking printing, multi-colour printing, bulk printing, colour half-tone screen printing and precision printing etc.It is extensive to be used for printing of spinning, glass, ceramics, metal, plastic, rubber industry.

Production process

Maishi purchase raw materials from TISCO(Taiyuan Iron & Steel Co.,Ltd.), which is well known for good and stable quality.

After recieing the materials, we will do through inspection: wire diameter checking, surface checking, tolerance checking, contents checking etc.

We tested contents by XRF Analyzers( X-Ray Fluorescence) to make sure the raw materials are reliable.

After materials quality confirmed, we will start beam-warping, put the wire on beam, draw the warp wire into heddle and reed.

Debugging the machine (checking if it is running properly or not), then begin the trial weaving. The machine will be adjusted several times until get the qualified mesh.

Immediate correction (repairing the machine, replacing the material) will be made if any quality problem discovered when adjusting the machine.

After finishing production, we will do the final inspection., including mesh surface checking, length measurement, element content assured(%), quantity, weight per roll, etc.), and then cut the size according to the requirement from the customer.

Packaging in standard ways or as customer’s specific requirements to ready for shipment.

Raw material check

Meterial preparation

Finish dia.warping beam

Length check

Surface check

Mesh weaving

Material check

Packing

Packing into box

Inspection process

1. Firstly, the yarns will be inspected: tensile, roundness, surface and tolerance etc.

2. When we finish weaving, we will inspect the big defects, such as sliding wires, yarn broken, warp yarn lost or weft yarn lost.

3. If the mesh pass all the above inspections it will be sent to do the heat settlement department. After heat settle ment,

the mesh will be taken to the final inspection: tensile strength, different colors, oil spots etc.

4. At end, we rolling the mesh on paper tube or make packaging according to customer orders.

FYI: All the inspections in above process are all according to ISO9044 standard.

Product characteristic

① Low elongation, high tensile strength, alkali resistance, chemical resistance, wear resistance, moisture resistance is good, high temperature resistance.

② Antioxidantive, chemical reaction is small, high hardness, not easy to be deformated while using.

MAISHI is a leading manufacturer of high-tech wire mesh products.

Through our dedication to customer-centric innovation and over 30 years development, MAISHI products have been exported to over 95 countries, serving more than 30 of the top 500 enterprises. Read More…

Get In Touch

0086-311-89277936

11th Floor of Sinochem Building,

No.707 Lianmeng Rd,Xinhua,

Shijiazhuang, Hebei, 050070,

China