Screen printing mesh screen printing various colors

Everyone knows about screen printing. What you may not know about its color is the width of yellow and white. The manufacturer of the wheat stone technology can explain to you that no matter what color the screen printing mesh can print irregular objects.

When printing irregular objects, you need to pay attention to ink coloring.

Pay attention to three points when screen printing mesh ink is toned: a. When adding ink, try to add less color inks. The less the color ink type, the better the mixing effect. b. With the principle of “from shallow to deep”, no matter whether you are preparing light or bright colored inks, be careful when the hue is close to the sample. Ink produced by different manufacturers, it is best not to mix and call, try to use

the same manufacturer of different colors of ink to color, otherwise it will produce uneven color tone, in severe cases will appear condensation and ink scrap. c. Some screen printing inks are dried by drying. Light-colored drying is shallower than undried, and darker after drying. In addition, whether or not the color tone of the ink differs before and after drying at the time of printing is a problem that is easily overlooked.

Ink grading is very important. To prepare a light-colored silk screen printing ink (printing material), it is necessary to add as little white ink as possible, because white ink is highly active, and it is easy to cause discoloration of other colors. Silk screen workers must adjust their inks and must do so.