Stainless steel wire filter mesh is the filter media for many factories. Application: petroleum, chemical, pharmaceutical, chemical plants. According to the knitting method of the stainless steel wire filter mesh, it can be divided into other metal meshes such as a mat mesh, a square mesh, a steel mesh, and the like. The amount of stainless steel wire filter mesh required is still large. Many customers will want to produce qualified stainless steel wire filter mesh. Is there a good measure?
A. The metric of the combined filter:
1. Selection of filtration effect and filtration flow rate For example, the filter can be made into a folding fan line filter to increase the filtration area.
2, single layer, multi-layer, double layer
3, welding defects, is to observe whether the weld is welded, the welding is not strong.
Second, the woven filter network measurement standard:
1. Filter mesh number, for example, 60 mesh, 40 mesh, each mesh number corresponds to multiple
2, filter material, such as stainless steel, copper, ordinary iron, etc.
3, the diameter of the filter, positive and negative difference of 1mm. d. The thickness of the filter wire diameter, the flatness of the mesh surface, etc.
Third, the measurement of punching filter:
1, punching net thickness
2, what material of the filter
3, the hole spacing and aperture of the punching net
The above is the standard that needs to be measured when the stainless steel wire filter mesh is produced. Please contact maishi professionals for more product related knowledge.
Leave a Comment