News

In every stage of dairy production, the precise selection of stainless steel filter meshes is crucial for ensuring product quality and stable production line operation. As a direct manufacturer, MAISHI MFG has compiled the following specification selection guide based on common process scenarios to help you efficiently meet your needs.
  
Raw Milk Reception Stage: Coarse Filtration, Intercepting Visible Impurities At the initial stage where raw milk enters the system, it is necessary to effectively remove visible impurities such as grass fragments and sediment larger than 0.3 mm. MAISHI MFG typically recommends 40–60 mesh stainless steel wire mesh, with an aperture range of 0.25–0.4 mm and a wire diameter of 0.25–0.3 mm, enabling efficient preliminary filtration and laying the foundation for subsequent processes.
Pre-Homogenization Safety Filtration: Protecting Key Equipment Before the material enters precision equipment such as homogenizers, finer safety filtration is required. The most commonly used filter mesh in this stage is 80 mesh, with an aperture of approximately 0.18 mm and a wire diameter of 0.12–0.14 mm, effectively intercepting fine particles and protecting core equipment from damage.
Yogurt Production: Retaining Clumps, Ensuring Texture At the discharge outlet of the fermentation tank in yogurt production lines, a fine mesh is required to retain coagulated lumps and ensure a smooth product texture. A 100–120 mesh fine mesh is recommended here, with an aperture of 0.12–0.15 mm and a wire diameter of 0.1–0.12 mm. The edges of such filter meshes provided by MAISHI MFG are electrophilished, burr-free, and can be used directly on machines, ensuring safety and efficiency.
  
Cheese and Whey Processing: Reliable Separation In the whey discharge stage or during whey separation in cheese production, 60–80 mesh filter mesh is typically used, with an aperture between 0.18–0.25 mm and a wire diameter of approximately 0.2 mm, enabling reliable solid-liquid separation at this critical process point.
  
CIP Cleaning Solution Recovery: Cost Optimization In the cleaning solution recovery stage of the CIP (Clean-in-Place) system, the goal is to filter out larger impurities to extend the service life of the cleaning solution. A 30–40 mesh coarse mesh is sufficient here, with an aperture of 0.45–0.6 mm and a wire diameter of 0.3 mm. 304 material is fully adequate in this environment, helping to control costs.
  
Why Choose MAISHI MFG?
Direct Supply, Quality Assurance: As a professional manufacturer, we ensure stable product quality with no middleman markups.
Complete Specifications, Fast Delivery: Mesh counts range from 1 to 635 mesh; standard widths are available from stock, and special sizes support quick customization.
Diverse Materials, Choose as Needed: Various materials such as 304, 304L, 316, 316L are available to meet different working condition requirements.
   
MAISHI MFG is your reliable filtration solution partner. If you have any needs, please feel free to contact us immediately!